User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator()
- Recording Indicator()
- Playback Indicator()
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player

IE Remote DVR
1. If connect directly to the web address for the VGN Embedded
DVR, please type in http://192.168.16.107 (The IP address are for
demonstration, please setup according to your own IP address). If
you are using floating IP address, and had applied DDNS, then
you can inset the Domain Name directly. Enter the below window:
If under the web server function for ChateauServer, type in
http://192.168.16.107:8080 (Connection to ChateauServer use the
8080 communication port, the IP address are for demonstration,
please setup according to your own IP address). If you are using
floating IP address, and had applied DDNS, then you can inset the
Domain Name directly and add “:8080”. Then enter the below
windows:
Click ENTER and enter the host selection window. If groups are set
for ChateauServer program, then the group categorize window will
be shown to search for the hosts for monitoring. Select the hosts
52