User`s manual

IP 192.168.2.20; Listening Port setting: LAN 50000 WAN 60001
IP 192.168.2.21; Listening Port setting: LAN 50000 WAN 60002
IP 192.168.2.22; Listening Port setting: LAN 50000 WAN 60003
Chateau network setting as below
IP 192.168.2.23; Listening Port setting: LAN 40001 WAN 60004
IP 192.168.2.24; Listening Port setting: LAN 40001 WAN 60005
IP 192.168.2.25; Listening Port setting: LAN 40001 WAN 60006
Note: LAN and WAN setting port numbers have to be different
on the same host.
Router network setting as below
192.168.2.20:50000 < -------- > 211.175.21.43:60001
192.168.2.21:50000 < -------- > 211.175.21.43:60002
192.168.2.22:50000 < -------- > 211.175.21.43:60003
192.168.2.23:40001 < -------- > 211.175.21.43:60004
192.168.2.24:40001 < -------- > 211.175.21.43:60005
192.168.2.25:40001 < -------- > 211.175.21.43:60006
 Chateau Network Connection Setup：
User must setup the network connection for the computer system
which installed with Chateau program to monitor or monitored
(Installed with VGuard Card) by other system.
Enter System Setup for Chateau program. Select Address book
setting: Select New to add a new server IP address:
Key in a Server name for this system. If the remote site is under
DDNS, you will require using the correct dynamic domain name
and the IP address must be 0.
45