User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
192.168.1.11:40000 < -------- > 211.172.12.34:40000
This means, the Server IP setting for VGN embedded DVR network
setup or Chateau system address setup:
If under Internet to connect to server, all Server IP address is
211.172.12.34.If under the same LAN with the server, then the
Server IP address is 192.168.1.11.
10.2 Network Connection Setup:
Server Program: Please run server program from a computer:
You will require to setup System Administers name and password when
activate Server program. Lost of the password will require to uninstall
the software and reinstall.
Server’s default communication port is 40000. If this port would conflict
with other programs, user can alter this port setting. To alter port setting:
you will require login the server program as administer,
“ File->Shutdown Server ->Manage -> Listening port setup”. When this
port is changed, you will require changing the server port from network
setting for VGN Embedded DVR and also changing the listening port
of Address book setting for Chateau main program to the same value.
43