User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
41
FILE LIST ： 2006-05-03
START END CAMERA LENGTH
14:00:00 15:00:00 1-4 660.0M
14:00:00 15:00:00 5-8 662.3M
13:00:00 14:00:00 1-4 680.4M
13:00:00 14:00:00 5-8 560.0M
12:00:00 13:00:00 1-4 702.3M
12:00:00 13:00:00 5-8 720.4M
Use up and down button to select the file time and camera number for
backup, and press the select button the following will be shown:
FILE BACKUP ： 2006-05-03
1. START TIME 14：00：00
2. END TIME 15：00：00
CH1 ON
CH2 ON
CH3 ON
CH4 ON
User will require setting the start time and end time then using up and down
button to select the camera number for backup. And press select button on
top of the camera name. System will then backup files to USB devices. You
will then be able to read the file using VG Player (V5.4 or later).
Backup files do not require copying full files. You will only need to set the
start time and end time to cut the file for backup to save spaces.
Chapter 10 : Network Function
This system supports network function. You can use the remote software for
network connection. The system using the remote software can be installed
with digital video surveillance cards and operating remote