User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
1. Use this output control to shut off the alarm sound when alarm
triggered.
2. Use up, down buttons to select the outputs and press select
button to adjust output from OFF-ON or ON-OFF.
Chapter 9 : File Backup
By connecting USB devices (USB flash disk , USB Hard disk and USB
DVD Burner) to the system, you will able to backup file. Before you backup
the files, please format the USB flash disk and USB Hard Disk as FAT32,
otherwise it might not be able to detect from the system. It is suggest to
format the DVD disks on this Embedded DVR.
Connect the USB device to the USB sockets at the back of the system,
press
USB backup function, the following picture will be shown:
FILE BACKUP DATE LIST
DATE HDD
2006-05-05 HDA1
2006-05-04 HDA1
2006-05-03 HDA1
2006-05-02 HDA1
2006-05-02 HDA1
Use up and down button to select the files date for backup and press the
select button the following will be shown:
40