User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
will be able to see the symbol
or whether the recording indicator from
the front panel.
4.2 Auto Record
If the Auto record is set as ON under system setting, system will
automatically start recording when turned on.
4.3 Stop Record
This system will not be able to stop recording from any button on the front
panel. You will require entering the“advanced setup＂and selecting the
“stop record” to stop recording.
Chapter 5 : Playback
This system is with multi task capability. You can also playback images when
recording. But a maximum of 4 images can be played back at once. (channel
1-4 or channel 5-8). Playback image as below:
Camera Name: On playback images, camera name will be shown on
the top left hand side of the image for every camera.
Active：If
symbol is displayed on the image, this means that this
camera is selected (Active). If this camera is with audio recording, you
will be able to hear the sound when this camera selected.
Playback: When
is displayed on the images, this means that this
images is playback image.
33