User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
allowed to monitor. Unauthorized camera will not be displayed.
From left to right are camera 1/ camera 2/ camera 3/ camera4.
Camera 5-8: This is to display the camera that the remote user is
allowed to monitor. From left to right are camera 5/ camera 6/
camera 7/ camera8. (8 channels or above systems support
camera 5-8)
Camera 9-12: This is to display the camera that the remote user
is allowed to monitor. From left to right are camera 9/ camera 10/
camera 11/ camera 12. (16 channels system support camera
9-12)
Camera 13-16: This is to display the camera that the remote
user is allowed to monitor. From left to right are camera 13/
camera 14/ camera 15/ camera 16. (16 channels system support
camera 13-16)
Network Info
User can use
left or right buttons to enter the Network
Info.
NETWORK SETUP : NETWORK INFO
1.LOCAL IP 000.000.000.000
2.DNS SERVER 000.000.000.000
3.MAC ADDRESS 000.000.000.000
4.DDNS CONNECT FAIL
Network Info will display the IP address for System IP, DNS, MAC
(Media Access Control). And the DDNS connection status.
3.7 Input /Output Setup: (Optional)
IO SETUP : OUTPUT
1. OUTPUT1 ON 20
2. OUTPUT2 OFF 30
3. OUTPUT3 ON ---
4. OUTPUT4 --- ---
5. S.M.A.R.T -- -- -- --
27