User`s manual

 Primary IP, Secondary IP: User can setup 2 sets of DNS IP.
 DDNS Setup
VGN4/8C-RT4 system don’t support DDNS function, this setup page
would not be shown. Users can uses
left、 right button to
enter the DDNS（Dynamic Domain Name Server）setup. If the IP for
VGN Embedded DVR is a real IP in Internet, no matter is a fixed IP or
Floating IP, you can apply a Dynamic Domain Name for this VGN
Embedded DVR. Of which means DDNS will require to be set from
NETWORK SETUP -> CONNECTION -> MODE : WAN or DIAL-UP.
After DDNS is set, when monitoring through IE browser, then IP
address is not necessary, domain name will be required.
Firstly, users will require applying for a DDNS account and password
and a domain name. There are 4 DDNS suppliers that is supported at
this moment, you can select any one of the below
 dyndns.org
 no-ip.com
 freedns.afraid.org
 zoneedit.com
NETWORK SETUP : DDNS SETUP
1. ENABLE OFF
2. DOMAIN NAME ---------------
---------------
---------------
3. USER NAME ---------------
---------------
4. PASSWORD ---------------
---------------
5. DDNS SERVER [e-mail]
 ENABLE：Activate DDNS function. When setup as “On”, it will
enter DDNS automatically and transfer the IP address in use to
DDNS.
25