User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator()
- Recording Indicator()
- Playback Indicator()
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player

NETWORK SETUP : CONNECTION
1.LISTEN PORT 50000 50000
2.MODE DIAL-UP
3.USERNAME MANUAL SETUP IP
4.PASSWORD 000.000.000.000
5.AUTO CONNECT ON
DIAL-UP Mode
Users with PPPoE connection can select Dial-Up Mode.
User Name, Password: Username and password is require to
enter when connection. There might not be a small letter
available for some systems, User will require putting “+” in front
of every letter if the password and username is small letter. For
example, user’s name is “chateau”, you will require to enter as
+C+H+A+T+E+A+U
Auto Connect: When activated, system will auto connect when
system restarts.
DNS Setup
User can use
left, right to enter DNS (Domain Name
Server) setup. DNS will let the domain name correspond to the correct
IP address. If the connected server is a domain name then DNS setup
is required.
NETWORK SETUP : DNS SETUP
1.GET IP AUTO GET IP
GET IP: There are Auto Get IP and Manual Setup IP for setting
of DNS IP address. Auto Get IP can be done when a DNS
address is assigned under LAN.
NETWORK SETUP : DNS SETUP
1.GET IP MANUAL SETUP IP
2.PRIMARY IP 000.000.000.000
3.SECONDARY IP 000.000.000.000
Get IP: DNS IP can be manually setup.
24