User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
23
communication ports. Please refer to Chapter 10
Network
Connection Setup.
Mode: There are three connection modes. LAN mode, WAN
mode and Dail-Up mode using (PPPoE).
Get IP: Under LAN mode, IP setup can be Auto get IP and
manually set IP. If the LAN network is with DHCP function, the IP
address can be automatically got.
NETWORK SETUP : CONNECTION
1.LISTEN PORT 50000 50000
2.MODE LAN
3.GET IP MANUAL SETUP IP
4.LOCAL IP 000.000.000.000
5.NET MASK 000.000.000.000
6.GATEWAY 000.000.000.000
Manual Get IP
Under LAN Mode, users can manually setup IP.
Local IP, Net Mask, Gateway: The IP address for Local IP, Net Mask
and Gateway for the System.
NETWORK SETUP : CONNECTION
1.LISTEN PORT 50000 50000
2.MODE WAN
3.LOCAL IP 000.000.000.000
4.NET MASK 000.000.000.000
5.GATEWAY 000.000.000.000
WAN Mode
User with Fix IP address can select WAN Mode.
Local IP, Net Mask, Gateway: Under WAN Mode, Local IP, Net mask
and Gateway setting is the information provided from your ISP.