User`s manual
Table Of Contents
- System Specification
- System Introduction:
- System Front Panel:
- USB
- Number 1-8 Buttons
- Number 9 Button
- Number 0 Button
- Power Indicator（）
- Recording Indicator（）
- Playback Indicator（）
- Record/ Switch to Recording Display Button:
- Setting / List Button
- Leftward Button / Playback Backward
- Upward button / Step Playback / Pause Playback
- Rightward Button / Playback Forward / Output Control
- Select / Backup Button
- Playback Button
- Subtract 1 / Next / Slow Speed Playback
- Downward Button / PIP Function
- Add 1 / Last One / Fast Speed Forward
- Cancel / Stop / Alarm Log Button
- System Back Panel:
- Hard Disk Installation:
- System Front Panel:
- System Setting
- Record
- Playback
- PIP Function
- Alarm Log
- I/O
- File Backup
- Network Function
- VG Player
channel per hour.
Display: Defaulted is on (activate), you can change to off if display not
require.
Brightness: Brightness adjustment. Defaulted is 115, adjusting range
from 0-255, 0 is the darkest and 255 is the brightness.
Contrast: Contrast adjustment. Defaulted is 130, setting range from
0-225, 0 is the lowest and 255 is the highest.
Saturation: saturation adjustment. Defaulted is 150, setting range
from 0-225, 0 is the lowest and 255 is the highest.
Hue: Hue adjustment. Defaulted is 128, setting range from 0-255.
Video Configuration Default: When users want to get back to the
defaulted brightness, contrast, saturation and hue, press the
select / confirm button and press to save the setting.
3.4 Alarm Setup
This system supports alarm functions, which include sensor input trigger
alarm, video lost trigger alarm, and motion image trigger alarm.
Alarm setup is to setup the alarm function for each camera. Every camera
has its own setting. Below is the setup menu for the camera 1, other
cameras can be setup using the same method. Users can use
leftward、
rightward to change to different camera setup menu.
18