User`s manual

3.2 Time / Display Setup
TIME/DISPLAY SETUP
1.DATE 2006/5/8
2.TIME 18:00:08
3.TIME ZONE GMT+08
4.SYSTEM TIME ON
5.CAMERA NAME ON
6.SYSTEM STATUS ON
7.MAIN+SUB DISPLAY OFF
Time / Display setup is for setting the system time and display status. User
the up and down button to select and press the select button to confirm
setting:
 Date: Use the leftward and rightward button to select year, month and
date. You can also use the number 1-9 and 0 to key in the number
directly, (the numbers will automatically move to the left side), or you
can use
add、 subtract button for setup.
 Time: Setup hour, minutes and seconds. Setting is as above.
 Time Zone: Use
add、 subtract button for setup. For example
Taiwan’s time zone is GMT+08
 System Time: The defaulted is on (activate), system will display the
system time on the monitor.
 Camera Name: Defaulted is on (activate), system will display the
camera name on the monitor. Camera name will need to setup under
“Camera Setup menu”.
 System Status: Defaulted is on (activate), system will display
system status on the monitor. Mainly is showing the hard disk sizes
and hard disk free spaces.
Note: You must stop recording when setting up date, time and time
zone.
 MAIN+SUB DISPLAY：Defaulted is “OFF”. Select a camera after
16