Instruction Manual

MK13 MOD 0 MOUNTED ON MK16
EGLM Instruction Manual
MK13 MOD 0 MOUNTED ON MK16
Loosen the Jaw levers, if you
detect the tenon emerge from the
slideway.
There have a screw in the Jaw
Levers.
Adjustment the screw to clock-
wise.
Until the tenon not emerge from
the slideway.
Setting the magazine.
MK16/17 launcher Mount com-
bines with SCAR's 6 O'clock
M1913 STD rail.
ATTENTION: EGLM must paral-
leled SCAR's 6 O'clock M1913
STD rail
Sway the launcher; make sure
the rail close fitting. The trigger
module need very close with Trig-
ger guard.
Lock on Jaw levers. If you can
easily lock on Jaw levers, that is
correct. If not, please go back the
step to reset the reset the launch-
er. Do not force to lock the Jaw
levers for fear the tenon broken.
Please, adjustment the screw, if
the EGLM loose.
If you want take apart the EGLM.
Please, loosen the screw.









1 2
3
4
5
6
7
8
9
NOTE:
If your SCAR has changed the barrel. Please, use the star screw driver to loose
the 6 screw on the up receiver.
EGLM must paralleled SCAR's 6 O'clock M1913 STD rail, when you set the
EGLM on the SCAR.
Locking the 6 screw on the up receiver after adjustment the barrel set's position.
KEEP PARALLELED