User`s manual

Mainboard Installation

3.4.8 J6 - RESET SWITCH CONNECTOR

Attach the Reset switch cable to this connector. The Reset switch restarts the system.

Setting Description

Close Reset

Open Normal

Table 18

3.4.9 J7 - KEYLOCK & POWER LED CONNECTOR

J7 is a keylock connector that enables and disables the keyboard and the Power-LED on the case.

Pin Description

1LED Power

2Not Used

3 Ground

4 Keyboard Inhibitor

5 Ground

Table 19

3.4.10 JP26 - GREEN PC BREAK SWITCH

JP26 is for the Green feature activation Break Switch. When JP26 is changed from open to

close then open again, the system will go to suspend mode immediately. In suspend mode; if

JP26 is changed from open to close then open again, the system will resume immediately.

3.4.11 JP27 - SM_LED CONNECTOR

JP27 is used for Power Management Mode. If the system operate in Power Management

Mode, the indicator will turn on during the mode.

Pin Description

1+ Anode

2- Cathode

Table 20