User`s manual

Hardware Configuration
19
2.5 JP28, JP29 - VL-BUS IDENTIFY PINS
Set the jumpers, JP28 & JP29 to configure the VL-Bus Clock Speed. Refer to Fig 2 for their location.
Set the jumper as below.
JP28, JP29 -- VL-Bus Clock Speed
2.6 JP16 - CMOS RAM BATTERY SETTING
Please set JP16 is for CMOS RAM battery as below. Refer to Fig 2 for the location of JP16.
JP16 -- CMOS RAM Battery Setting
2.7 JP17 - MONITOR SETTING
Set the jumper, JP17, to configure the mainboard for either CGA, monochrome, OR VGA/EGA
display. Refer to Fig 2 for the location of JP17. Set the jumper as below.
JP17 -- Monitor Setting
Table 4
Table 5
Table 6