Owner`s manual

TB0087 - 12° Puck Transducer. For Mounting on a Electric Trolling

Motor, In-Hull Mounting, Portable Use, or Ice Fishing. Comes with 25

Feet of Cable.

TB0032 - Dual Beam 9/19° Puck Transducer. For Mounting on a

Electric Trolling Motor, In-Hull Mounting, Portable Use, or Ice Fishing.

Comes with 25 Feet of Cable. Built-In Switch Box must be Mounted

within 3 Feet of the Depth Finder.

TB0050 - 19° Ice-Ducer. Self Leveling and Floats in the Ice Hole. Comes

with Float, Stopper, and 7 Feet of Specially Designed

Cable.

TB0051 - 9° Ice-Ducer. Self Leveling and Floats in the

Ice Hole. Comes with Float, Stopper, and 7 Feet of

Specially Designed Cable.

TB0052 - Dual Beam 9/19° Ice-Ducer. Self Leveling

and Floats in the Ice Hole. Comes with Float,

Stopper, and 7 Feet of Specially Designed Cable.

Built-In Switch Box must be Mounted within 3 Feet of the Depth

Finder.

TB0080 - 12° Ice-Ducer. Self Leveling and Floats in the Ice Hole. Comes

with Float, Stopper, and 7 Feet of Specially Designed Cable.

SB-100 Switch Box - The SB-100 Switch Box allows you to run two

transducers on one FL Series unit. You could switch between a trolling

motor mounted transducer and a stern mounted one or, while ice fish-

ing, switch between the hole you are fishing from and a remote hole.

Also, the SB-200 is available as a switch box for two units and one

transducer.