User guide

CLEAN LINE

Clean Line is a feature which can help determine the

hardness of the bottom. Clean Line "cleans out" the target

signal on harder objects. Ahard bottom will appear cleaned

out in the center. Asoft bottom will be all black.

Press the MENU button twice, then, the 3 button to enter

the Clean Line submenu. There are two levels, High and

Low. Use High over softer bottom and Low over harder

bottom. Press the 2 button to activate the Clean Line fea-

ture on High. Press the 3 button for Low.

CLEAN ECHO

Clean Echo reduces interference from other depthfind-

ers running on the same frequency. Press the MENU but-

ton twice, then, the 4 button to enter the Clean Echo sub-

menu. To turn it on press the 2 button. To turn it off press

the 1 button.

A-MODE

A-Mode gives an instantaneous, vertical, representa-

tion of the depth below. It gives you the ability to recog-

nize bottom changes and targets before they scroll onto the

normal display.

To enter the A-Mode submenu, press the MENU but-

ton twice, then, the 5 button. To activate the feature press

the 2 button. To turn it off press the 1 button.