Programming instructions

accessories
Auxiliary Accessories
Flashlight
Flashlight Kit • 1
For More Information, and additional Parts & Pieces refer to:
www.VEXRobotics.com
Limited 90-day Warranty
This product is warranted by
VEX Robotics, Inc. against
manufacturing defects in material
and workmanship under normal use
for ninety (90) days from the date
of purchase from authorized VEX
Robotics dealers. For complete
warranty details and exclusions,
check with your dealer.
VEX Robotics, Inc.
1519 IH 30 W
Greenville, TX 75402
4/10
The Flashlight will help your robots see in the dark! The included Flashlight will turn night
into day with its four powerful LEDs, allowing for robot operation in low-light conditions.
Instructions for use:
1. Simply mount the Flashlight either using the included standoffs and screws, or other VEX
hardware.
a. The mounting tab at the bottom of the Flashlight will allow it to mount easily onto the
side of any VEX component.
2. Plug the 2-prong cable into a power-source. This accessory will draw power from
a 3-wire PWM motor port on a VEX Microcontroller. When connecting to a
VEX Microcontroller - plug the 2-prong connector into a 3-pin socket of a Motor
Port such that the connector is against the at edge (not the keyed edge) as
shown. The key on the 2-prong Flashlight connector should NOT be inserted into
the key of the socket.
3” Threaded
Standoff (2x)
VEX Microcontroller
3-wire PWM Motor Ports
Connecting to
a “at edge”
Your Robot
Structure
LED Flashlight
Module (1x)
8-32 x 1/4” Long
Screw (4x)
8
7
6
5
4
3
2
1
3. Switch the Flashlight switch to “on”.
a. Ensure the Microcontroller is turned on and has power.
Go to Reference Links