Programming instructions
Motion Accessories
Inventor’s Guide insert2 Wire Motor 393 • 2
accessories
2 Wire Motor Kit, continued
Gear Change Procedure
To congure the high speed option, follow
these instructions:
2. Lift off the top cover. Do not disturb the
gears inside.
3. Lift off the output bushing and place
to the side. This will be used later.
4. Remove the middle gear and the output
shaft gear.
5. Install the high speed middle gear. 6. Install the high speed output shaft gear.
7. Install the output bushing removed in step 3.
Make sure the bushing orientation is as shown.
8. Replace the cover and four screws
removed in steps 1 and 2.
1. Remove the four screws in the corners
of the front of the motor case.
Go to Reference Links