Data Sheet

To cut to length, insert the V5 Cable

Stock underneath the cutting blade.

Squeeze the crimping tool rmly to

cut the cable.

Place the cable into the wire stripper

and press it ush against the metal

back stop. Squeeze down, and with

the tool still squeezed, pull the cut

cable from the end of the cable stock.

Insert connectors on each side of the

cut cable. Ensure that cables are fully

seated inside connector, and that

they are correctly oriented.

Insert the connector into the

crimping tool and squeeze rmly.

Creating Custom Length Wires

with the V5 Crimping Tool

PAGE 1
Creating Custom Length Wires with the V5 Crimping Tool To cut to length, insert the V5 Cable Stock underneath the cutting blade. Squeeze the crimping tool firmly to cut the cable. Place the cable into the wire stripper and press it flush against the metal back stop. Squeeze down, and with the tool still squeezed, pull the cut cable from the end of the cable stock. Insert connectors on each side of the cut cable. Ensure that cables are fully seated inside connector, and that they are correctly oriented.