Data Sheet
Page 12
VEX Classroom Competition “Swept Away”
Copyright 2009 VEX Robotics, Inc.
Field Assembly Instructions cont.
6. Attach the two (2) WALL pieces together as shown. Note, each WALL piece has two (2) hooks to
engage in two (2) slots on the other wall piece. Ensure that all four (4) hooks are fully engaged.
7. Install the wall assembly from Step 6 onto the field perimeter assembly from Step 5 as shown.
The wall assembly has four hooks on each end which will grab onto matching slots on the field
perimeter. Ensure the wall assembly is centered such that it divides the field in half.
There are (3x) sets of mounting slots near the center of the field. Ensure the wall is installed in the
correct set, (furthest from where the SIDE and CORNER pieces are joined) as pointed out by the
arrow in the image below.