User Guide

27
Step 20
Plug into Port 1
Port 6
Port 1
Plug into Port 6
Robot Base is now Ready to Run!
Test it before continuing the Build.
• Insert Robot Battery into Brain.
• Connect the Controller to the Robot Brain with the Tether Cable.
• Turn on the Robot Brain by pressing the check button.
• Run the Driver Control Program.
• Move the left joystick - does the left side move?
• Move the right joystick - does the right side move?
If the robot base does not perform as expected, refer to pages 85-111.
To continue building the Clawbot, follow the instructions on pages 28-65.
To build the Autopilot robot, follow the instructions on pages 78-84.
12
6
11
5
10
4
9
3
8
2
7
1
Refer to pages 85 through 111 for
information on the built in Driver
Control program in the Robot Brain.