User Guide

Control System Guide

Start Screen and List of Programs

Programs

The Programs Screen of the Robot Brain is the ﬁrst screen displayed after turning on the

Robot Brain, and will contain a list of all programs that have been downloaded to it. The

default program is Driver Control, which allows you to use and control up to eight Smart

Motors and four Sensors.

If additional programs have been downloaded to the Robot Brain, use the Up/Down arrows

to navigate between programs. The currently selected program will be highlighted; to run the

selected program, press the Check button.

Run or Conﬁgure Driver Control

Programs › Driver Control

The Driver Control program is unique in that it contains the ability to customize the way it

runs. This program is the default program loaded onto the Robot Brain.

When selecting the Driver Control program from the Programs Screen, two additional

options are presented: Run or Conﬁgure. Use the Up/Down buttons to select the Run option,

and press the Check button to begin running this program with the default settings.

Use Up/Down arrows to highlight Driver Control, then press the Check button.

Use Up/Down arrows to highlight Run, then press the Check button.

Run

Configure

Select Exit

Driver Control

Select Settings

Programs

Autopilot