Guide

1.Think
3.Test
2. Do
cont.
C.6
Your First Robot Idea Book Page: Clawbot IQ Claw
Student Name(s):
Teacher/Class: Date: Page #:
Instructions:
Follow the steps on this page while you use the Clawbot IQ
Instructions (build steps 49-87) to build the Clawbot IQ Claw
(after Robot Base, Tower, and Object Holder are done).
1. “THINK” - Here is where your “idea” or “problem” is written/drawn:
Examples: “Idea - I want to build the Clawbot IQ’s Claw” or “Problem -
Claw doesn’t open or close.”
Draw your idea or problem here, too, if it helps you to describe it.
2. “DO” – Here is where you list your task or tasks that your “THINK” step created:
Examples: “Use Clawbot IQ Instructions to build Clawbot IQ Tower” or “Check claw motor, shaft,
shaft collars, and cable connection to Robot Brain.”
3. “TEST” – After your “DO” step is done, test your design. Write down your observations:
Does your Clawbot IQ Claw function like is expected? YES NO
If you answered “YES” - Congratulations! You will score well on the Build Rubric. You may now move
on to other lessons.
If you answered “NO” - Use your observations above and the Build Rubric to determine what
problem exists, then use another copy of this page to help solve that problem. Keep repeating this
“THINK-DO-TEST” process, until your Claw functions correctly.
Problems ARE NOT failures. They are an expected part of the design process!