Guide

1.Think
3.Test
2. Do
C.6
Your First Robot Idea Book Page: Standard Drive Base
Student Name(s):
Teacher/Class: Date: Page #:
Instructions:
Follow the steps on this page while you use the Clawbot IQ Instructions (build
steps 1-19) to build the Standard Drive Base.
1. “THINK” - Here is where your “idea” or “problem” is written/drawn:
Examples: “Idea - I want to build Clawbot’s base” or “Problem - right side wheels don’t turn.”
Draw your idea or problem here, too, if it helps you to describe it.
2. “DO” – Here is where you list your task or tasks that your “THINK” step created:
Examples: “Use Clawbot IQ Instructions to build the Standard Drive Base” or “Check right side wheels,
shaft, shaft collars, Smart Motor, and cable connection to Robot Brain.”
3. “TEST” – After your “DO” step is done, test your design. Write down your observations:
Does your Standard Drive Base drive and function like is expected? YES NO
If you answered “YES” - Congratulations! You will score well on the Build Rubric. You may now move
on to build the rest of the Clawbot IQ or move on to other lessons.
If you answered “NO” - Use your observations above and the Build Rubric to determine what problem
exists, then use another copy of this page to help solve that problem. Keep repeating this “THINK-
DO-TEST” process, until your Robot Base functions correctly.
Problems ARE NOT failures. They are an expected part of the design process!