User Manual

Inventor’s Guide insert

accessories

structure accessories

metal and hardware kit • 1

metal and hardware kit

Metal and Hardware:

This kit contains additional structural elements that you can

use to build bigger, better, stronger, and more complex robot

designs. Or, since bigger isn’t always better… use the pieces

in this kit to make sure that you always have the most

efﬁcient part for the job. All the parts included in this kit

were also included in the Starter Kit, so consult your

original Inventor’s Guide for building tips and examples on

how to use them.

screw, 8-32 x ¼" x 70

INSERT THESE PAGES

at the back of the

Structure Chapter in your

Vex Inventor’s Guide.

screw, 8-32 x

/8" x 28

screw, 8-32 x ½" x 28

screw, 8-32 x ¾" x 14

lock nut x 14

keps nut x 65

threaded screw

for collar x 16

collar x 16

chassis rail x 4

chassis bumper x 2

plate x 2

bearing ﬂat x 16

bearing block x 6

plus gusset x 2

0.318" plastic

spacer x 20

0.182" plastic

spacer x 20

washer, steel x 30

washer, delrin x 10

PAGE 1
structure accessories metal and hardware kit screw, 8-32 x ¼" x 70 plate x 2 chassis bumper x 2 screw, 8-32 x 3/8" x 28 screw, 8-32 x ½" x 28 screw, 8-32 x ¾" x 14 chassis rail x 4 lock nut x 14 collar x 16 plus gusset x 2 threaded screw for collar x 16 0.182" plastic spacer x 20 keps nut x 65 bearing block x 6 washer, steel x 30 bearing flat x 16 washer, delrin x 10 0.318" plastic spacer x 20 Inventor’s Guide insert © 2005 Innovation One. All Rights Reserved.
PAGE 2
structure accessories metal and hardware kit, continued fully threaded beam (½") x 10 long angle bar x 4 partially threaded beam (2") x 4 partially threaded beam (3") x 4 square bar (2") x 4 long bar x 4 square bar (12") x 2 pivot x 2 square bar (3") x 4 gusset x 2 lock plate x 4 accessories fully threaded beam (1") x 8 Limited 90-day Warranty This product is warranted by Innovation One against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date