Instructions / Assembly

- 9 -
EL ELECTRICAL SAFETYECTRICALSAFETY
To reduce the risk of electric shock:
 Thisproductrequiresa properlygroundedoutlettoreduce theriskofelectricshock.
Ensurethepower outletis properly groundedinaccordance with all local codes and
ordinances. The plug and outlet should look like those in Fig.A. Consult with a qualified
electrician orservice personifgrounding instructionsarenotunderstoodorifthereisdoubt
asto whether theequipment is properly grounded.
 Do not modify the powercord plug provided with the tool. Neverremovethe
grounding prong from the plug. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
 Do not use the tool ifthe power cord orplug is damaged. Ifdamaged,haveit
repaired by a service facility before use.
 Outlet must match the plug. Donotuseanykindofadapterwithanearthed(grounded)
plug.Unmodified plugs andmatching outlets will reduce the risk of electric shock.
 Avoidbody contactwithearthedorgroundedsurfacessuchaspipes,radiators,
rangesandrefrigerators. Thereisanincreasedriskofelectric shock if your body is
earthed or grounded.
 Do not expose this product to rain or wet conditions. Water entering the product will
increase the risk of electric shock.
 Ifanextension cord is needed, use a 12AWG(2.5mm')minimumto supplythe
correctamount of current for the tool. Anundersizedcordwillresult in voltage drop
which willcause lossof powerand overheating.
 Useonly a3-wireextension cord with a grounding plugthat hasa properly
groundedreceptaclethatwillaccept theplug on this tool.