Instructions / Assembly

- 6 -
complacent and ignore safety principles. A careless action can cause severe
injury within a fraction of a second.
 This product is not intended for use by persons (including children) whose
physical, sensory, or mental capabilities are different or reduced, or lack
experience or knowledge unless such persons receive supervision or training
in the operation of the appliance by a person responsible for their safety.
Childrenshouldbe supervised to ensure that they do not use the device as toys.
POWER TPOWER TOOL USE AND CAREOOL USE AND CARE

CLEAN THE SPRAYER AFTER EACH USE.

Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.

Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must
be repaired.

Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
SSERVICEERVICE

Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.

Check for damaged parts before each use. Check to determine that guards
operate properly and perform their intended function. Check for alignment of