Instructions / Assembly

- 37 -
CAUTION
·Do not run sprayer dry for more than 30 seconds. Doing so could damage pump
packings
·Protect the internal drive parts of this sprayer from water. Openings in the cover
allow for air cooling of the mechanical parts and electronics inside. If water gets
in these openings, the sprayer could malfunction or be permanently damaged.
·Prevent pump corrosion and damage from freezing. Never leave water or
water-base paint in sprayer when its not in use in cold weather. Freezing fluids
can seriously damage sprayer. Store sprayer with Pump Armor to protect sprayer
during storage.
SPRAYTIP SELECTION
Spray tips are numbered so that:
SPRAYTIP SELECTION
•The first digit, when multiplied by two, gives the spray width in inches (with the spray tip 1
-foot (30cm) away from the surface being sprayed).
•The last two digits specify the orifice size in thousands of an inch (Note: a larger orifice
increases paint flow).
•The following are recommended spray tip orifice sizes for varying types of coating material:
Lacquer & Stain: 0.007” — 0.013" Enamel: 0.011” — 0.015” Acrylic: 0.015” — 0.021”
NOZZLE SPRAY TIP SELECTION CHART
Orifice Size (Inches)
Spray Width (Inches)
0.007”
0.009”
0.011”
0.013”
0.015”
0.017"
0.019”
0.021”
0.023”
0.025”
0.027”
0.029”
0.031”
0.033”
0.035"
2- 4
107
109
111
113
115
117
119
121
129
4- 6
209
211
213
215
217
219
221
225
227
229
231
235
6- 8
307
309
311
313
315
317
319
321
323
325
327
329
331
333
335
8- 10
409
411
413
415
417
419
421
423
425
427
429
431
433
435
10- 12
509
511
513
515
517
519
521
523
525
527
529
531
533
535
12- 14
609
611
613
615
617
619
621
623
625
627
629
631
633
635
14- 16
711
713
715
717
719
721
723
725
727
729
731
733
735
16- 18
813
815
817
819
821
823
825
827
829
831
833
835
18- 20
923
927
931
933
935