Instructions / Assembly

- 36 -
Flammable materials spilled on hot, bare, motor could cause fire or
explosion. To reduce risk of burns,fire or explosion, do not operate
sprayer with cover removed
 Keep all screws. nuts. washers. gaskets, and electrical fittings
removed during repair procedures. These parts usually are
 not provided with replacement kits.
 Test repairs after problems are corrected.·
 If sprayer does not operate properly, review repair procedure to verify
you did it correctly. See Troubleshooting.
 Overspray may build up in the air passages. Remove any overspray
and residue from air passages and openings in enclosures whenever you
service sprayer.
 Do not operate the sprayer without the motor shroud in place. Replace
if damaged. Motor shroud directs cooling air around motor to prevent
overheating and insulates the control board from accidental electric shock.
To reduce risk of serious injury, including electric shock:
Do not touch moving or electric parts with fingers or tools while testing
repair.
Unplug sprayer when power is not required for testing
Install all covers, gaskets, screws and washers before you operate
sprayer.