Instructions / Assembly

- 28 -
1. Once primed,
adjust nozzle to
Spray setting
2.Start spraying at the lowest setting
on the Pressure Control Knob and
increase pressure as needed
byturning clockwise to create a good
Painting Techniques
Before painting ensure the Sprayer has been primed(see Priming and
Startup steps) and verify that Nozzle Tip is aligned properly keep the gun
approximately 1 foot from the surface.
1. Keep gun
straight and move
arm across at a
steady rate while
staying one foot
from the surface
2. Do not fan the
gun or paint will be
uneven
3. Overlap strokes
by half, always aim
stroke at bottom
edge of last stroke