Instructions / Assembly

- 24 -
Operation
WARNING:
Make sure sprayer is turned off and unplugged from power source.
Setup:
Note: Remove or cover objects that you want to protect from over spray (paint
mist)
1. Attach Paint Hose
to Paint Hose Outlet
and tighten with
wrench.
2. Attach Paint Hose
Paint Gun and tighten
with two wrenches
3. Turn Pressure Control
Knob to Low Pressure
Spray setting.
To Relieve Sprayer Pressure
1. Tum Power Switch
off and unplug unit
from outlet.
2.Switch Prime/Spray
switch to Prime mode
3. Point gun into paint
pail and activate
Sprayer Trigger to
relieve pressure.