Instructions / Assembly

- 27 -
5. Attach Paint Hose
to Paint Hose Outlet
and tighten with
wrench.
2. Attach Paint Hose
Paint Gun and tighten
with two wrenches
3. Turn Pressure Control
Knob to Low Pressure
Spray setting.
Per alleviare la pressione dello spruzzatore
5. Tum Power Switch
off and unplug unit
from outlet.
2.Switch Prime/Spray
switch to Prime mode
3. Point gun into paint
pail and activate
Sprayer Trigger to
relieve pressure.
4.Turn Trigger Lock
Knob to Locking
position.
Note: Always set to
Prime mode between
uses
Procedura di rilascio della pressione
Ogni volta che viene richiesto di scaricare la pressione, interrompere la
spruzzatura, controllare o eseguire la manutenzione dell'attrezzatura
oppure installare o pulire l'ugello di spruzzatura.