Instructions / Assembly

- 21 -
Locking the Spray Gun
The gun is secured when the trigger lock is at a
90 angle(perpendicular) to the trigger in either
direction.
Unlocking the Spray Gun
To unlock the gun,turn the trigger lock to be in line
with the trigger.
Applicable for wall painting paint, clean with water.
Electrical bonding
A high pressure hose, hose assembly, and spray gun assembly shall be
constructed to provide electrical bonding to dissipate static electricity from
the tip of the Spray gun through the spray gun assembly and the couplings
at the ends of the hose to the pump assembly. The spray gun assembly
shall also provide an external means to dissipate static electricity during
the cleaning process when spraying into a metal container. Construction
Black hose is constructed of an extruded, seamless thermoplastic inner
tube, chemically bonded to multi-layers of high tensile synthetic resistant
polyurethane cover. A static drain element of flexible,eclectically conductive
material is located between the braid layers.
FEATURES
 Polyurethane cover permits greater flexibility and tighter bends.
 Resistant to flex fatigue.
 Dissipates static charge.
 Will not swell or degrade in contact with most paint chemicals, oils and
most other solvents.
 Light weight- approximately half of comparable rubber or wire hose.
 O.D smaller than comparable rubber hose without reducing the l.D.,