Instructions / Assembly

- 19 -
INSTALLATION
Returns are not accepted & warranty is void if the sprayer is not
properly cleaned immediately after every use. Clean the sprayer
immediately to prevent permanent damage.
Grounding and Electric Requirements
Grounding Instructions This product must be grounded.
In the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This
product is equipped with a cord having a grounding wire with an
appropriate grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and
ordinances. Improper installation of the grounding plug can result in a risk
of electric shock.If repair or replacement of the cord or plug is necessary,
do not connect the green grounding wire to either flat blade terminal. The
wire with insulation having a green outer surface with or without yellow
stripes is the grounding wire and must be connected to the grounding pin.
Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided.
If the plug will not fit the outlet, have the proper outlet installed by a
qualified electrician.
The sprayer cord includes a grounding wire with an appropriate
grounding contact.
Never use an outlet that is not grounded or an adapter.