Instructions / Assembly

- 9 -
Ensurethepower outletis properly groundedinaccordance with all local codes and
ordinances. The plug and outlet should look like those in Fig.A. Consult with a qualified
electrician or service personif groundinginstructions arenotunderstood or ifthereisdoubt
asto whether theequipment is properly grounded.
 Do not modify the powercord plug provided with the tool. Neverremovethe
grounding prong from the plug. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
 Do not use the tool ifthe power cord or plug is damaged. Ifdamaged,haveit
repaired by a service facility before use.
 Outlet must match the plug. Donotuseanykindofadapterwithanearthed (grounded)
plug.Unmodified plugs and matching outlets will reduce the risk of electric shock.
 Avoidbody contactwithearthedorgroundedsurfacessuch aspipes,radiators,
rangesandrefrigerators. Thereisanincreasedriskofelectric shock if your body is
earthed or grounded.
 Do not exposethis product to rain or wet conditions. Water entering the product will
increase the risk of electric shock.
 Ifanextension cord is needed, use a 12AWG (2.5mm')minimum to supplythe
correctamount of current for the tool. Anundersizedcord willresult in voltage drop
which willcause lossof powerand overheating.
 Useonly a3-wireextension cord with a groundingplugthathasa properly
groundedreceptaclethatwillaccept theplug on this tool.
 Follow localcodeswhen choosinga solvent pail for flushing. Useonly conductive
metal pails placed on a grounded surface such as concrete. Do not place the pail on a
nonconductive surface such as paper or cardboard. Connect a ground wire between
the pail and a ground such as a metal pipe. When flushing orrelieving pressure