Instructions / Assembly

- 54 -
Problem
Cause
Solution
Spray gun stopped
spraying.
Suction tube is leaking.
Tighten the suction tube connection. Inspect
the tube for cracks or vacuum leaks.
Nozzle Spray Tip is
clogged.
Unclog the Nozzle Spray Tip.
Paint runs down the wall
or sags.
Coat is going on too thick.
Move the gun faster.
Choose a Nozzle Spray Tip with a
smaller orifice.
Choose a Nozzle Spray Tip with a wider fan.
Ensure a sufficient distance (1-foot or 30cm)
from the gun to the painted surface.
Coverage is too thin or
sprayed paint is
inadequate.
Coat is going on too thin.
Move the gun slower.
Choose a Nozzle Spray Tip with a larger
orifice.
Choose a Nozzle Spray Tip with a
narrower fan.
Ensure a sufficient distance (1-foot or 30cm)
from the gun to the painted surface.
Fan pattern varies
dramatically while
spraying.
OR
Sprayer does not
turn on promptly
when resuming
spraying.
Pressure Control Knob is
worn and causing
excessive pressure
variation.
Have the sprayer serviced by a qualified repair
person.