Technical Support and E-Warranty Certificate www.vevor.com/support FOLDING THRESHOLD-RAMP USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
FOLDING THRESHOLD-RAMP TYPE A TYPE B Model: 21YF5QCV0 / 19UQ9FV0 / Model: CUEI5QV0 / 13E5LEV0 1YAZTIV0 / 12YUIHV0 /1JQ8CRV0 17MST1V0 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
1. Important Safety Instructions WARNING: 1. Carefully read and understand instructions and procedures before installing and using the threshold ramp. Prior to assembly and use,read and follow all instructions,warnings,and labels. Warning - To reduce the risk of injury, user must read instructions manual carefully. Read and understand this instruction manual prior to using this product. Failure to do so may result in serious injury or death. Warning- Be sure to wear gloves when using this product. 2.
7. Use it only if the secure,unobstructed,level landings can support,at minimum,the same weight capacity as the ramp(800Ibs.) 8. The ramp surface may be slippery in wet conditions;use caution if the surface is wet as traction may be reduced 9. Do not use the ramp if its surface is covered with ice,snow,dirt,leaves,or other debris.Remove all accumulations and sweep the surface clean before use. 10. Improper use of the ramp could result in serious injury. 11.
3.Connecting board： Please place the product firmly on the steps and make sure it is stable before use. 4.Before each use,check the ramp for worn,loose,or damaged parts.If you find any of these conditions,do not use it. 3.How to USE Step1:Unpack the product from the packaging . Step2:Remove the latch from the latch hole and unlock the product Step3:Unfold the product. （TYPE A） step1 step2 （TYPE B) step3 Step1:Unpack the product from the packaging .
step1 step5 step2 step4 step3 step6 step7 Step8:Please put this product firmly on the step. Choose a ramp of appropriate length based on the recommended height. The load-bearing capacity of the ramp should not exceed 800lbs.Before use, please make sure that this product can not be shifted.
Notes: 1. When the latch is not removed from the latch hole, please do not forcefully unfold the product. 2. Fold the products by reversing the order in which they were expanded. 3.When using a wheelchair on this product, please be sure to move it slowly from a low position to a higher one. And when you move it from a high place to a lower place, it may cause a fall for the wheelchair user In addition, a sudden push or sudden braking of a wheelchair may result in an accident.
4.
5.Maintenance Guide 1. Place the product on a sturdy, secure, accessible, and level starting point. The minimum weight capacity of the starting point must be equal to that of the ramp (800 lbs). Do not exceed the maximum weight capacity of the product. 2. Ensure that the product is securely flush against the starting point. If a safe, accessible, and level starting point cannot be found, or if the product does not fit securely against a higher starting point, do not use the ramp. 3.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.Suite 250.
Technical Support and E-Warranty Certificate www.vevor.
