Use and Care Manual

Split Machine Installation Diagram
The air condenser
Ice water feeding
interface (white)
Automatic cleaning
drain interface (black)
1.The installation of the split machine shoul
d pay attention to the water cooling type
more than the condensation into the drain
age two joints,
2．The bottom of the ice storage tank has
a drain outlet at the bottom. First, the 4/6
outer thread connecting head in the
fittings is screwed into the central hole at
the bottom of the ice storage bucket, and
then connected with the 4/6 hose, and
finally exported to the sewer.
-6-
*Caution：Mark swirls interfaces need wrapping tape.
The unipolar filter presented by our company can not
meet the drinking water standard. Please buy and re
place it on your own!
The condenser drain pipe has pressure and cannot be co
nnected with other drains to prevent the case from flowi
ng into the machine and must be inserted into the sewe
r independently.
Master control part of
split ice maer
(water cooled)
**
*
Sewer Sewer
Sewer
Ice water inlet
4/6'threa ded joint (black) Scr ewed
into a centra l drainage holes at the
bottom of the i ce storage bin
Caut ion
Caut ionCaut ion
Automati
c cleaning dr
ain pipe
Ice storage bin
Ice water inlet
Ice water inlet pi
p
e
Ice water outlet
Cooling water outlet
Cooling water inlet
copp er
Mast er control p art of sp lit ice m aker
Condensation water inlet
pipe(water cooling)
C
i
o
p
n
e(
d
w
e
a
n
t
s
e
a
r c
ti
o
o
ol
n w
ing
a
)
ter drain
p