Use and Care Manual

Drain pipe
(black)
Ice water inlet
(white thread)
Cooling water inlet （black thread)
Cooling water outlet （black thread)
Water cooling
configuration/ customization
Model label
-3-
Foot Installation And Foot Placement
1. Screw the feet of the ice maker to the baseplate.
2. Each foot must be screwed up and tightened so as not to
bend.
3. Put the ice maker in a sturdy and flat position.
4.Adjust the height of the foot to make the ice maker level.
5. The ice maker is not suitable used in the outdoors. The
normal using ambient temperature is between 10-38 degrees
centigrade, and the water temperature is between 5-30
degrees. Our maximum ice production temperature is:
ambient temperature: 21 degrees, water temperature 10
degrees centigrade. High temperature will seriously reduce
the amount of ice production. We suggest that the client put
the ice maker in a room with cold air.