Use and Care Manual

-10-
1.
Switch on: LCD control panel lights up.
2.
Switch on time-delay:
Water inlet: Display time C00, icons of Clean, Freezing, Ice cube harvest and Ice full of
storage light up.
Switch on clean: Display time is cleaning time, Clean icon lights up.
Pressure balance: Icons of Clean, Freezing, Ice cube harvest and Ice full of storage light
up. If condenser sensor had fault, Fault icon lights up, Condenser sensor icon
lights up, temperature displays EE.
3.
Manual clean: Clean icon flashes. Displays time is cleaning time.(It will not display
icon, if the programhas no cleaning function..
4.
Ice freezing: Rreezing, Comp. and regarding icons light up.
Display time is ice freezing time. After entering the countdown program, it displays
remaining time for ice making. In the status of delayed shutting down, Freezing icon
flashes.
If condenser sensor had fault, Fault icon light on, Condenser sensor icon lights
up, temperature displays EE.
5.
Ice harvest: Ice cube harvest icon light up. Display time is ice cube harvest time.
In the status of delayed shutting down , Ice cube harvest icon flashes.
If condenser sensor had fault, Fault icon lights up, Condenser sensor icon lights up,
temperature displays EE.
6.
Ice full: Ice full of storage icon lights up. Display time is ice full time. All the load works
will be turned off.
Ice full of storage icon works with ice chute board. When the ice chute board close,
Ice full of storage icon lights up, Ice full of storage icon goes out when ice chute
board opens. No button pressed for 60 seconds, screen locked, screen lock icon lights
up. Press any key to unlock.
Ice full is released (compressor is on delayed status), Ice full of storage icon flashes, turn
on delay. If condenser sensor had fault, Fault icon light on, Condenser sensor
icon lights up, temperature displays EE.