Use and Care Manual

-8-
LCD Control Panel Operating Manual
(Available for some models)
General description : This is a fully automatic ice making machine, all programs of the
LCD control panel have been set up in the factory. Usually, the user just need to do
some simple operation. Please place the machine in the appropriate location and
connect to power supplies. (If your machine has red switch on the machine’s back
or left side, please turn on it. I=Turn on, O=Turn off) Then the LCD control panel will
light up, the machine will run automatically, the user need no any other operation. If
you want to stop the machine, just close the red switch.
Note: Unplug the power supplies after finishing the day's work .
Ⅰ. Button instruction
A. There are five tangibly buttons below the control
panel
Pictures
Name Function
On/Off button
Turn on/off the machine and
set the program
Model button
Adjust the running model
Clean/Set button
Clean and set
Schedule/+ button
Increase the thickness of ice
and the duty time.
Light/- button
Reduce the thickness of ice
and duty time,control the
light.