Installation Instructions Water flow system ice cube making machine LB55A,LB80A,LB100A,LB120A,LB150A,LB175A,LB210A,LB300A, LB300TA,LB400TA,LB500TA,LB600TA,LB700TA,LB1000TA, LB1500TA,LB1950TA,LB2200TA,IB200A,IB255A,IB320A
Catalogue Ice Maker Overview. . . . . . . . . . . . . . . .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Reception and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . . . . . 1 Ice Maker Exterior Structure and Interface Names. . . . . . . . . . . . . . . . . . . 2 Foot Installation and Foot Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 3 Installation of Water Supply. . . . . . . . . . . . . . . . . . . . . . . . .
Ice MakerOverview 1.Our company's ice maker adopts advanced technology and technique method, and the strict and comprehensive quality inspection ensures the excellent performance. 2.The core component of the ice maker is compressor which adopts the world famous brand, such as Embraco, Secop, Tecumseh. Together with the reasonable configuration of the refrigeration system, makes the performance of the ice maker more reliable and the energy consumptionlower. 3.
Ice Maker Exterior Structure and Interface Names Model nameplate Plastic door of ice storage bin Display screen Front panel Supporting foot Power switch (optional) -2- Drain pipe Ice water inlet (black) (white thread)
Model label Water cooling configuration/ customization Cooling water inlet （black thread) Cooling water outlet （black thread) Drain pipe Ice water inlet (black) (white thread) Foot Installation And Foot Placement 1. Screw the feet of the ice maker to the baseplate. 2. Each foot must be screwed up and tightened so as not to bend. 3. Put the ice maker in a sturdy and flat position. 4.Adjust the height of the foot to make the ice maker level. 5. The ice maker is not suitable used in the outdoors.
. ice making machine should not be installed in the environment without sewer and water seepage, and it is strictly prohibited from high temperature equipment. 7. air-cooled ice making machines (such as refrigerators, ovens, etc.) rely on air circulation to dissipate heat. So it is necessary to keep the space above 15cm to benefit the heat dissipation. Installation of Water Supply 1.The ice maker must use drinkable normal atmospheric temperature filtered water. 2.
All-in-one MachineInstallation Diagram Tap water Pure water *Caution Air cooled ice maker *Caution 4/6' inlet pipe Sewer Drain pipe Ice water 4/4' inlet pipe inlet Filter core must be taken out before use, tearing off the packaging film and tightening it back The filter cover Pure water Tap water Filter cartridge The filter tank Cooling water inlet Water cooled ice maker *Caution Sewer Sewer Drain pipe eding Ice water fe *Caution The pipe joints on the machine have signs，If there is a
Split Machine Installation Diagram 1.The installation of the split machine shoul d pay attention to the water cooling type more than the condensation into the drain age two joints, 2．The bottom of the ice storage tank has a drain outlet at the bottom. First, the 4/6 outer thread connecting head in the fittings is screwed into the central hole at the bottom of the ice storage bucket, and then connected with the 4/6 hose, and finally exported to the sewer.
SK/SM Control Panel Operating Manual Power 1. When the machine is in working state, press his key to stop the program and shut down automatically. 2. When the machine is not working, press this key to start it immediately. Status When the machine is in working state, press this key to jump to execute the deicing subroutine. There are two situations: 1. When appropriate ice is available, his key can stop the ice making process and turn to the deicing process. 2.
LCD Control Panel Operating Manual (Available for some models) General description : This is a fully automatic ice making machine, all programs of the LCD control panel have been set up in the factory. Usually, the user just need to do some simple operation. Please place the machine in the appropriate location and connect to power supplies. (If your machine has red switch on the machine’s back or left side, please turn on it.
water flow system ice maker B. The exact instruction about the function of the buttons a. On/Off button 1. Press it to turn off ice machine in the status of power ON . 2. Press it to turn on ice machine in the status of power OFF. 3. Press it to schedule time in the status of time schedule setting. 4. Press it to turn off the machine in the status of time schedule. b. Clean/Set button 1. Press the button in the status of power OFF , releasing the button when it flashes, machine works on manual clean. 2.
1. Switch on: LCD control panel lights up. 2. Switch on time-delay: Water inlet: Display time C00, icons of Clean, Freezing, Ice cube harvest and Ice full of storage light up. Switch on clean: Display time is cleaning time, Clean icon lights up. Pressure balance: Icons of Clean, Freezing, Ice cube harvest and Ice full of storage light up. If condenser sensor had fault, Fault icon lights up, Condenser sensor icon lights up, temperature displays EE. 3. Manual clean: Clean icon flashes.
7. Fault: Fault icon lights up, corresponding fault status icons light on. All the load works will turn off. 8. Switch off: Displays OFF. 9. Schedule time setting: Time schedule icon lights up. Display time is the schedule time to turn on the machine. 10. Schedule status: All icons of Clean, Freezing, Ice cube harvest, Ice full of storage light up. Time schedule icon flashes. Displaying scheduled time counts down. 11.
Ⅲ. Several frequently-used procedures setting for your reference. Please operate as the following steps when you need. A. How to adjust the thickness of the ice? Step 1.When the is on making ice model. Press the discretional one of the five buttons to unlocked. Step 2. Press Schedule/+ button, the position which displays temperature will flash “00”.
Step 3. Press Schedule/+ button and Light/- button to adjust. Press Schedule/+ button for one time，the position which displays temperature will appear “01” as the following picture. It means the ice making time will be increased 1 min, the ice will become thick. Press Light/- button for one time，the position which displays temperature will appear “-1” as the following picture. It means the ice making time will be reduced 1 min, the ice will become thin.
B. How to clean the machine? Step 1. Press the discretional one of the five buttons to unlocked. Step 2. Press On/Off button, the control panel will appear 'OFF' as the following picture. Step 3. Press Clean/Set button, the control panel will display clean pattern. Usually, 2 minutes to clean the machine is enough. Step 4. Press Model button 3 times to back to making ice model.
C. How to set the program when the ice storage is full? When the ice storage is full, the control panel will display'full ice‘pattern as the following picture. Step 1. Use ice shovel to clean the ices which cover on the ice chute board. Step 2. Press the discretional one of the five buttons to unlocked. Step 3. Press On/Off button to turn off the machine, the control panel will appear'OFF'. Step 4. Press On/Off button to turn on the machine, then press 3 times Model button to back to making ice model.
Ice Thickness Adjustment Instruction (Available for some models) The ice thickness detector works as follows: When the ice maker starts working, the pump will draw water from the sink to the shower pipe. The water passes trough the pipe, then flows into the tank from the top of the ice lattice. When the water is circulating, the compressor works to cool down the ice lattice. The water will gradually cool to 0 degree celsius. The ice will appear and thicken in the ice lattice.
LED Control Panel Operating Manual (Available for some models) Power-on Delay Water Intake Situation Display. Power-on Delay: After water intake finish, displays Standby time.
Clean Display When ice harvest , press Clean button Display: Clean light flashes, enter into cleaning. Fault：Light flashes， corresponding fault item lights ON.
Freeze: Displays ice freezing time, after freeze finish, began to harvest, it will dis la 30s countdown. Condenser Sensor and Fault Light ON. Standby Display ：No operations within 2mins, the backlight becomes dark, will recover bright against any operations.
Routine Cautions 1. When transportation and mobile location, the ice machine tilt shall not exceed 45 degrees. 2. Ice machine, please use independent water source, and check regularly to prevent water pressure is too low, fluctuations or filter clogging. 3. Do not store any sundries in the ice storage room, or freeze any food in the ice storage room and keep the ice shovel clean. 4.
Maintenance In order to improve the reliability and service life of the ice maker, and to avoid the increase of the energy consumption coefficient of the ice production, the maintenance and maintenance should be carried out according to the requirements of this manual. 1. Often clean the environment around the ice maker to keep clean, do not plug the ice machine in the case of ventilation shutters. 2.
Ice Maker Work Steps The working steps of the ice maker are divided into three parts : 1. The automatic cleaning of the ice machine ( once, time 2 minutes ) When each ice maker starts, the automatic 2 minute cleaning program is automatically carried out to clean the floating objects in the ice grid and the tank. In 2 minutes the sink uninterrupted water, pump operation.
Fault Ice maker does not start. Ice maker shuts down after operation Lack of ice production. Possible Cause Poor contact of socket. Replace the socket. Ice storage bin is full of ice. Remove the ice, the machine will run automatically. The cover of ice tray does not reset. Adjust the cover to make it reset free. The water supply has not been opened or not connected firmly. Recheck the water supply. Ice maker didn’t be placed horizontally. Adjust the feet to be horizontal.
Before calling for service If the ice maker is abnormal, please confirm the following contents before making a phone call : 1. Is the water source supply of the ice maker normal? The method of inspection is to loosen the ice water inlet ( 6” joints ) behind the machine, when loosening to a certain extent, the water will leak out. The water source supply will be normal when the water is exuded for a long time, otherwise, there is no water. 2.
Warranty 1. Our company undertakes to guarantee the machine warranty period of one year, in the warranty period, free of artificial service and replacement of parts. 2. The plastic parts of the machine are not covered by the warranty. 3. Our company's warranty is limited liability, do not bear all the joint and several liability in addition to the ice maker itself. 4.
The instruction is the undivided part of the ice maker. The user must keep it properly.
