Instructions / Assembly

- 12 -
then enter the value to be set , and then press [Trig] again.
9, "factory settings" method: press the [ auto ] button, and then hold the [5]
button not to let go, until the machine alarm "beep" after the release. The
machine is back to factory status.
About flow rate regulation
1, This product with flow rate adjustment KNOB, speed 1-100 adjustable,
and digital display flow rate value;
2，Rotating knob adjustment, the speed value will be a digital display, no
operation 3 seconds after the exit.
3, Press the KNOB, the flow rate value will display, You can view the
current flow rate value, no operation after 3 seconds of exit.
4，Flow rate can be adjusted at any time, after the adjustment,it will
automatically save, power-off memory.
How to use the set time method of filling
I， Press [ auto ]，long press [2] can switch to“the set time method of
filling”(the same method can also be restored to“ the set method of filling”).
2，The set time method of filling displays the number in seconds, accurate
to 0.01 seconds.
3，Press [ settings ] , input filling time, press [ settings ] , you can set the
filling time.
4，Press [ trigger ], input interval time, press [ trigger ] , can set the interval
time of automatic filling.
5，Press [ set ][ start ], load to the amount needed, then press [ start ][ set ]，
can extract filling time.
6，Automatic mode can be fixed interval between the automatic start,
manual mode by pressing the start button to start.