Instructions / Assembly

- 10 -
The display window and button function description
1, Display window:
Weight : displays the actual weight of the item being weighed
Set: User. set weight to be filled
Counter : number of bottles that have been filled
Trigger : the weight value that triggers the auto start
2，Button function:
[Man] : Enter manual mode
[Auto] : enter automatic mode
[Tare]: Peel and set to zero
[Set]: set the filling weight
[Trig]: set the trigger value
[Run]: manually start the filling function (click again to pause)
[Save]: store 4 groups of commonly used filling data
[M1-4]: Call the stored filling weight data
[ 0 ]: Counter value is cleared
The big green button and foot switch have the same function as the [Run]
on the keyboard.
The operating instructions
1，"Set " setting method: Press the [Set] key to enter the value (e. g. , set
100g, enter 1 0 ), and then press [Set] again.
2, "Trigger" setting method: (trigger value can not be less than 3 grams)
Press the [Trig] key, enter the value (e. g. , set 35g. enter 35), and then
press [Trig] again.
Note: The trigger value is set to≤empty bottle weight.In automatic mode,
the automatic filling is
triggered when the weight of the empty bottle exceeds the trigger value.
3, "Manual mode" operation method: (Press the [Man] key, the manual light
is on, enter the manual mode;)
(1) Put the empty bottle, press the [Tare] button to remove the empty bottle
weight, press the [Run] button to start the filling.The weight of the poured
liquid reaches the set filling weight and stops
automatically.