Instructions / Assembly

INSTRUCTION

Thank you for buying VEVOR

○

Electric Enclosure Cabinet or Box. Read this instruction carefully and make it fully

understand before any operation,and Keep this instruction.

This item is designed to enclose electrical equipment or electronic device, protect it against harsh,dirty environments.

!! Warning

 Enclosure box/Cabinet is only coating but NOT insulated. ONLY qualified electrician could deal with the inside circuits

and electrical parts. Warning Label or other signs could be posted according to relative laws or code if necessary.

 DO NOT Permit children to play with this item.

 The Electrical Enclosure box could be water proof ONLY all the holes has been sealed by soft gasket or

plug. For the holes cut by customer, please use IP65 Grade Gasket or parts to keep waterproof.

 This item MUST BE GROUNDED. Please refer to the “mounting instruction-Assembly the earth wire”.

! Tips

 Any damage on the finish coating could lead rust, tiny surface damage could be repaired by re-painting. But it will not

recommended when painting on large scale damages.

 The working temperature should be lower than 80°C，otherwise could lead the damage to the painting surface and

the failure of sealing.

SPECIFICATION

a) General

Color : RAL 7035 (White Gray) or RAL 2000 (Orange)

Body Material: Cold Rolled Carbon Steel

Inner plate: Galvanized Plate

Finish: Powder Coating (Surface Pickling and passivization)

Construction: Continuously Welded

Ambient Temperature: -40-55°C

Gasket Material： Seamless Foam/ Nylon(washer or plug)

Certification: TUV CE, UL 508A (CSA C22.2 No. 14-13.)

Ratings

：

NEMA Type 4

Protection Grade IP65, IK10

b) Dimension

PAGE 1
INSTRUCTION R Thank you for buying VEVOR ○ Electric Enclosure Cabinet or Box. Read this instruction carefully and make it fully understand before any operation,and Keep this instruction. This item is designed to enclose electrical equipment or electronic device, protect it against harsh,dirty environments. !! Warning  Enclosure box/Cabinet is only coating but NOT insulated. ONLY qualified electrician could deal with the inside circuits and electrical parts.
PAGE 2
Unit: cm Model No. Enclosure Inner Plate Mounting Hole Setting（±0.2cm） H1 W1 D1 H2 W2 Dia. H3 W3 ST7520 70 50 20 66.5 45 0.9 66 55.6 ST6630 60 60 30 56.5 55 0.9 56 65.6 ST6620 60 60 20 56.5 55 0.9 56 65.6 ST6430 60 40 30 56.5 35 0.9 56 45.6 ST6425 60 40 25 56.5 35 0.9 56 45.6 ST6420 60 40 20 56.5 35 0.9 56 45.6 ST5510 50 50 10 46.5 45 0.9 46 55.6 ST5425 50 40 25 46.5 35 0.9 46 45.6 ST5420 50 40 20 46.5 35 0.9 46 45.
PAGE 3
Accessories Guide Rail x1Pc Rain Hood x1Pc Hanging Lug x4Pc Gasket x1Pc (For Enclosing Plate) Earth wire x1Pc Accessories package x1set -- Earth label x3pcs -- Fasteners （Quantity Various on Type） -- Key x2pcs -- Plug x8pcs