Use and Care Manual

- 7 -
14. To keep children out of the work area. The door should be locked when
leaving the workshop.
15. Dress appropriately. Don't wear loose clothing, gloves, ties, rings,
bracelets, jewelry, etc. To be on the safe side, For the sake of safety，
wearing non-slip shoes. If you have long hair, please wear a work hat.
16. Wear protective glasses when operating.
17. Pay attention to where you stand and keep your balance at all times.
18. Do not place your hands near the moving parts of the machine.
19. Do not perform any setting operations while the machine is running.
20. Read and understand all warning signs posted on the machine.
21. This manual is intended only to familiarize customers with the operation
of the machine and is not a training manual.
22. Please obey these warnings or serious injury may result.
23. The machine will produce some harmful chemicals in the work of dust,
sawing, grinding and drilling produced by grinding. To reduce the harm
of these chemicals, please work in a well-ventilated place and wear
safety devices. Such as particulate filter masks.
Remaining risk factors
W A R N I N G

It is important to ensure that each machine has remaining
risks.
 In the execution of all work (even the simplest) greatest
attention is required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate
certain residual risk factors totally. The following hazards may arise in
connection with the machine´s construction and design: