Use and Care Manual

- 30 -
TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF
DEFECTS, DISCONNECT THE MACHINE FROM THE POWER SUPPLY.
Trouble
Possible cause
Solution
Noisy operation
a.Incorrect belt tension
b.Loose pulley
c.Loose bilt
d.Bad bearing
a.Adjust tension
b.Tighten pulley
c.Adjust belt tension
d.Replace bearing
Motor won’t start
a.Power supply
b.Motor connection
c.Switch connections
d.Motor windings burned
e.Bad switch
a.Check power cord
b.Check motor connections
c.Check motor connections
d.Replace motor
e.Replace switch
Tool rest or
tailstock
difficult to move
a.Need Lubrication
b.Bent bed rails
c.Lock nut tightened
a.Lubrication with light oil
b.Straighten bed rails
c.Loosen lock nut
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE
EXPERTLY CONNECTION TO THE ELECTRICITY GRID.
N O T I C E
Should you in necessary repairs not able to properly to perform or
you have not the prescribed training for it always attract a workshop
to fix the problem.