Use and Care Manual

- 29 -
Check the V-belts.
Determine for frayed belts cause. Check if uneven or rough surfaces and
were built on the V-belt pulleys. Replace frayed or stretched belts!
Cleaning
After each workshift the machine has to be cleaned. Remove chips etc.
with a suitable tool. Do not remove them by hand (cutting injury!). Remove
dust as well.
Disposal
Do not dispose the machine in residual waste. Contact your local
authorities for information regarding the available disposal options. When
you buy at your local dealer for a replacement unit, the latter is obliged to
exchange your old.
N O T I C E
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the
machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution .