Use and Care Manual

- 28 -
MAINTENANCE
The machine does not require extensive maintenance. If malfunctions and
defects occur, let it be serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you
should lubricate all connecting parts (if required, remove beforehand with a
brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if
required.
Check regularly the condition of the machine.
The good condition and perfect adjustment of the guiding rollers is
essential for a smooth band guidance and a clean cut.
Store the machine in a closed, dry location.
Maintenance plan
After each workshift:
Clean the machine and its parts with a strong jet of compressed air from
wood dust and other material remains. Moving parts can also be cleaned
with a brush or a soft brush. Apply a thin layer of lubricating oil to all moving
parts of the machine.
After 50 hours of operation
A T T E N T I O N
Perform all maintenance machine settings with the
machine being disconnected from the power supply!
Serious injury due to unintentional or automatic activation
of the machine!
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines
lifespan and is a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!